„Spintronika” változatai közötti eltérés

A lap 2013. június 29., 06:47-kori változata

Bevezetés

The spin dependence of electronic transport is hidden in most metals. However, spin polarized current injected to a nonmagnetic conductor keeps the spin memory within a certain distance, typically in the submicron range. By now, nanoscale devices have been prepared where the size of the components is well below the distance of the spin-memory, and both the control of the spin states and the utilization of the spin information have been demonstrated.\cite{Wolf16112001,Awschalom2007} In most of these electronic applications ferromagnetic components act as spin filter and detector, \cite{RevModPhys.76.323,0022-3727-35-18-201} while a nonmagnetic metal mediates the spin information: this is the simplest spin-valve structure. For the design of such nanodevices a proper understanding of spin dependent transport is necessary, including the knowledge of the carriers' spin-polarization, or the determination of the spin diffusion length.

In the first part of this review we present a simple model for the spin dependent transmission through a nanostructure based on the Landauer formalism widely applied in the field of nanophysics. In the second part a special measurement technique is reviewed, which allows the direct determination of the current spin polarization, and with which even the decay of the spin polarization i.e.~the spin diffusion length can be determined in a nonmagnetic layer. In the last part the nanoscale spin-valve architecture is discussed, demonstrating how the results of basic research find broad technical application and trigger an intensive development of novel memory elements.

Spindiffúziós hossz

Egy makroszkopikus vezetőben az elektronok számtalanszor szóródnak miközben eljutnak eaz egyik elektródából a másikba. Ahogy a nanovezetékek tárgyalásának bevezetésekor láttuk a szennyezőkön és rácshibákon történő rugalmas szórás az elektronok elektromos tértől nyert impulzusának elvesztéséhez vezet. Ennek a folyamatnak a karakterisztikus skáláját az átlagos momentumrelaxációs szabadúthossz, jellemzi. Rugalmatlan szórások esetén (pl. kölcsönhatás rácsrezgésekkel) az elektronok energiája megváltozik, és így elveszik a a fázisinformáció, azaz megszűnik az interferenciaképesség. Ennek a folyamatnak a karakterisztikus skálája az ún. fázisdiffúziós szabadúthossz, . Megfelelő távolságon belül az elektronok a mágneses momentumuk, azaz a spinjükhöz tartozó információt is elvesztik, amit a spindiffúziós hosszal, jellemezhetünk. Egy spindiffúziós hossznál kisebb, mágnesesen rendezett építőelemeket tartalmazó nanoszerkezetben azonban számos érdekes, az elektronok spin szerinti polarizáltságához kötődő jelenséggel találkozhatunk.

Spinpolarizáció ideális nanovezetékekben

A korábbiakban láttuk, hogy ha két elektróda közé egy ideális, szórásmentes nanovezetéket helyezünk, akkor abban keresztirányban állóhullámok, hosszirányban pedig síkhullám terjedés alakul ki, a vezetőképesség pedig , ahol M a nyitott vezetési csatornák száma, azaz azon különböző keresztmódusokhoz tartozó egydimenziós parabolikus diszperziók száma, melyek metszik a Fermi-energiát. A kettes szorzó a spin szerinti degenerációból adódott.

Egy ferromágneses nanovezetékben azonban különbséget kell tenni a fel és a le spinű elektronok között. A vezeték mágnesezettségét legegyszerűbben Stoner-képben vehetjük figyelembe, azaz az energidiszperziókhoz hozzáadjuk a kicserőlédési energiát, mely -el különbözik a fel illetve le spinű () elektronokra:

Emlékeztetőül: a hosszirányú terjedést, pedig a keresztirányú állóhullámok energiáját írja le. Fontos megjegyezni, hogy lehet tetszőleges Bloch-állapot diszperziója, nem kell feltétlenül szabad elektronoknak megfelelő parabolikus diszperziót feltételezni.

, és is the energy corresponding to the quantized transverse modes, is the dispersion of the extended Bloch states in the direction (=), is the spin index, and is the exchange energy. The resulting dispersion is a set of one dimensional dispersion curves, which are vertically shifted by the transverse energies and the exchange energy (Fig.~\ref{Qwire}(b)). The discrete one dimensional dispersions are called \emph{conductance channels}.\cite{PhysRevB.31.6207,datta_book}

1. ábra

Panel (a) demonstrates an ideal 2D quantum wire with parallel walls and the absence of scattering inside the wire. The standing waves demonstrate the quantized transverse modes in the wire. Panel (b) demonstrates the dispersion of the conductance channels inside the wire in a free electron picture. The blue parabolas correspond to spin up electrons, whereas the red parabolas stand for the spin down electrons. The two spin subbands are shifted by an energy . The thick/thin lines denote the occupied/unoccupied states. Note, that right going states () are occupied up to an energy higher by than the left moving states ().

In such an ideal wire the states with positive and negative are well separated, the former are all coming from the left electrode, while the latter are all coming from the right electrode. In a symmetric situation no net current flows. Application of a bias voltage between the two sides of the wire, however, shifts the chemical potentials of the right and left moving electron states by with respect to each other, and this imbalance results in a finite current. For a selected conductance channel the velocity of the electrons and the density of states is respectively given as

where is the length of the nanowire. The spacial density for the electron states in the energy window is obtained as

The current is then calculated as a product of charge, velocity and electron density, summing over the spins and all the conductance channels:

Here is the number of open conductance channels, i.e. the number of 1D dispersion curves crossing the Fermi energy for a given spin orientation. Note that cancels in the product of and , thus the above result is valid for any shape of the dispersion curve. Furthermore, the two dimensional model only simplifies the visualization, but the above arguments also hold for any perfect three dimensional nanowire with uniform cross section along the axis.

Here we have taken advantage of the assumption that the spin state is conserved, i.e. the structure is smaller than the spin diffusion length. This has allowed the separation of the current to a purely spin up and a purely spin down component being two independent \emph{routes} of the transport: . The total current is determined by the number of open conductance channels, and the conductance () is an integer multiple of k.

2. ábra

\begin{figure} [!h] \centering \includegraphics[width=\columnwidth]{fig2.eps} \caption{\it The dispersion curves around the Fermi energy for the different conductance channels. The bottom and top panels correspond to spin up and spin down electrons, respectively. Due to the exchange splitting the number of open conductance channels differs for the two spin subbands.} \label{linear} \end{figure}

Due to the shifted spin subbands, not necessarily equals . This is indicated by Fig.~\ref{linear}, where only the linearized part of the 1D dispersions around the Fermi energy is shown demonstrating that the free electron dispersions in Fig.~\ref{Qwire}(b) are only illustrations and are generally not considered in this model. The degree of the resulting spin polarization can be characterized by the ratio of the spin polarized current and the total current:

This normalized current spin polarization can reach even () in case of a half-metal, where only one type of carrier is present at the Fermi level.

3. ábra

\begin{figure} [!h] \centering \includegraphics[width=0.7\columnwidth]{fig3.eps} \caption{\it A diffusive ferromagnetic region is sandwiched between two normal metal ideal quantum wires. The transport is determined by spin dependent transmission probabilities between the conductance channels at the two sides.} \label{landauer} \end{figure}

A more realistic description can be given for the conductance of a piece of magnetic nanowire inserted between nonmagnetic reservoirs by taking also into account elastic scatterings (Fig.~\ref{landauer}). According to the Landauer picture the transport in this system can be be described by the transmission probabilities , i.e. the probability for the transmission of an electron from channel on the left side to channel on the right side. These transmission probabilities depend on the ``waveguide parameters of the wire. While corresponds to the previous model of an ideal wire, represents scatterings in the wire due to defects, impurities, etc.

As no spin mixing occurs between the spin up and spin down states, the current can still be calculated for each spin state independently taking into account the finite transmissions of the channels:\cite{PhysRevB.31.6207,Agrait200381,datta_book}

The values of depend on the Fermi wave numbers of the involved channels. Due to the spin-dependent shift of the dispersions the spin up and the spin down channels have different wave numbers at the Fermi energy. Thus, in general, the transmission probability may become spin dependent even without any direct spin-interaction, like spin-orbit coupling.

The spin dependent current can be rewritten in the form:

where is the average transmission probability for all the conductance channels with a given spin direction. With this notation the spin polarization of the current can be written as:

It is evident from this formula, that either the difference of the transmission probabilities for the two spin channels, or the difference in the number of open channels for spin up and spin down electrons gives contribution to the spin polarization of the current.

In case of a few conductance channels the difference in and may introduce a spin polarized current even for the same number of open channels. Indeed, for ferromagnetic atomic point contacts, the transmission probabilities for the two spin channels are expected to differ significantly.\cite{PhysRevB.77.104409}

However, for larger structures, where many conductance channels are present (Fig.~\ref{linear}), is an average over a broad ensemble of different wavenumbers, and for diffusive junctions random matrix theory (RMT) predicts a universal value of \(\bar{T}^{\sigma}=l_m^{\sigma}/L\),\cite{RevModPhys.69.731} where \(L\) is the length of the diffusive region. As the momentum relaxation mean free path is expected to be similar for the two spin subbands, can be assumed. Accordingly the key contribution to the spin polarization is given solely by the difference of and . In this limit, Eq.~\ref{Pc} gives a reasonable approximation for the spin polarization, even for non-ideal transmission probabilities ().

According to Eq.~\ref{vn} the number of conductance channels can be formally written as:

Introducing a mean Fermi velocity, which is the average of the Fermi velocities for the different conductance channels weighted by the density of states of the channels,

and noting that is the total density of states at the Fermi level, the formula for the current spin polarization can be rewritten as:

This formula supplies a microscopic background for the conventional formulation of the current spin polarization\cite{PhysRevB.70.054416} expressed by Fermi surface parameters of the two spin subbands: density of states and Fermi velocity.

4. ábra

\begin{figure} [!h] \centering \includegraphics[width=\columnwidth]{fig4.eps} \caption{\it Illustration for the density of states in ferromagnets. The magnetism is related to the exchange splitting of the narrow (or ) bands. Panel (a) demonstrates the DOS in Fe: for minority spins (left side) the band is above the Fermi level, whereas for majority spins (right side) the Fermi level lies inside the band. Accordingly the DOS is significantly larger for the majority spins. Panel (b) demonstrates the DOS for Co and Ni type band filling. In this case is above the band for majority spins, whereas it lies inside the band for minority spins resulting in a negative Fermi surface spin polarization with respect to the positive magnetization.} \label{DOS} \end{figure}

In real ferromagnets the exchange splitting of narrow (or ) bands and the filling of the bands determine the magnetic properties (see Fig.~\ref{DOS}). The integral of the density of states up to the Fermi energy is different for the two spin orientations, which results in a finite magnetization, conventionally selecting the up spin as the majority spin orientation. However, the electron transport is determined by the Fermi surface properties. The spin polarized transport is not characterized by the magnetization, rather it is described by the spin polarization of the current as described by Eq.~\ref{PcDOS}. An interesting example is supplied by the Co or Ni type band fillings: the density of states at the Fermi level is much larger for the down spin, leading to a situation where the current spin polarization may take a sign opposite to that of the magnetization (Fig.~\ref{DOS}b).

\section{The spin valve structure}

The knowledge of current spin polarization and spin diffusion length is essential for the design of spintronic devices. In the previous part we have shown an experimental method which allows the determination of both quantities. In the following we turn to the application of spin polarized transport by discussing the most widely utilized spintronic device, the nanoscale spin-valve structure. First we give simple demonstrative models for this structure, and then we briefly discuss possible applications for next generation data storage devices.

The basic idea of this structure dates back to the discovery of the giant magnetoresistance (GMR) effect by Albert Fert \cite{PhysRevLett.61.2472} and Peter Gr\"unberg \cite{PhysRevB.39.4828}, for which the Nobel price in physics was awarded in 2007. The architecture is based on two ferromagnetic layers, which are separated by a paramagnetic layer being thinner than the spin diffusion length (Fig.~\ref{GMR1}(a)). It was found that the conductance of this device is larger for the parallel orientation of the two magnetic layers than for the antiparallel orientation.

5. ábra

\begin{figure} [!h] \centering \includegraphics[width=\columnwidth]{fig9.eps} \caption{\it Panel (a) demonstrates the basic idea of a spin valve structure: two ferromagnetic regions are separated by a narrow normal region, and this structure is connected to normal leads at both sides. Panels (b,d) demonstrate the variation of the exchange energy along the structure. Panel (b) corresponds to the parallel magnetic orientation of the layers (both layers have magnetic orientation), whereas panel (d) demonstrates the antiparallel orientation ( in the first layer and in the second one). Panels (c) and (e) respectively show the equivalent ballistic model, where the change of the exchange energy is replaced by an effective narrowing or widening of the channel.} \label{GMR1} \end{figure}

To understand this phenomenon, as the simplest model we can consider an ideal quantum wire, in which the exchange coupling is switched on adiabatically in two regions (Fig.~\ref{GMR1}(b,d)). The parallel orientation is modeled by a positive exchange in both regions, whereas the antiparallel orientation corresponds to opposite signs of the exchange in the two regions. Similarly to the previous situations the current can be divided to two independent components corresponding to spin up and spin down electrons. For a given spin orientation the effect of the exchange energy is very similar to an effective spatial narrowing or widening of the channel, which would increase/decrease the transverse quantized energies (Fig.~\ref{GMR1}(c,e)). Therefore the system can be considered as serial connected quantum point contacts. For electrons with majority spin direction (spin direction parallel to the magnetization direction) the number of open channels is denoted by , whereas for minority spins (antiparallel spin direction to the magnetization direction) the number of open channels is . (Note, that here the superscript denotes majority orientation instead of the real spin direction, and the number of open channels is also for down spins in down oriented magnetization of the magnetic layer.)

In such ballistic quantum point contacts the conductance is determined by the number of modes at the narrowest cross section. If the two magnetic layers have antiparallel (AP) orientation either the first or the second layer restricts the number of channels to , and so the conductance for both spin channels is , i.e. the total conductance is . For parallel orientation of the magnetic layers the conductance is if the spin direction of the carriers is the same as the magnetization, and it is if the magnetization has opposite orientation to the spin orientation of the carriers. The net conductance is . The magnitude of the magnetoresistance effect can be characterized by , where . With this notation the relative change of the conductance turns out to be equal to the current spin polarization characteristic to the ferromagnetic metal applied,

This simplified model corresponds to the perfectly ballistic limit, where no backscatterings are considered inside the quantum wire.

In a more realistic model the scattering inside the nanostructure should also be considered. If the structure is smaller than the phase diffusion length, the scattering in the two layers are added coherently, and accordingly the total resistance relies on the fine details of quantum interference phenomena.

6. ábra

\begin{figure} [!h] \centering \includegraphics[width=\columnwidth]{fig10.eps} \caption{\it Resistive model of the GMR effect. The two magnetic layers are separated by an incoherent nonmagnetic region. The top panel demonstrates the parallel alignment of the magnetic layers (both layers have magnetization direction), whereas the bottom panel demonstrates the antiparallel alignment (the left layer has and the right layer has magnetization direction). and denote the conductance of a layer for electrons with majority and minority spin direction, respectively.} \label{GMR2} \end{figure}

For even larger junctions, where phase coherence between the two magnetic layers is already lost (), but the spin information is still preserved (), the two scattering regions are connected \emph{incoherently} (Fig.~\ref{GMR2}), and accordingly their resistances are simply summed to get the total resistance.\cite{note1} In this limit the magnetoresistance of the spin valve structure is also easily calculated. To compare with the previous ballistic model we calculate with conductances: the conductance for majority spin states is , whereas for minority spins it is . For antiparallel oriented magnetic layers the total conductance is , whereas for parallel oriented layers it is . From these

follows. Note, that this model is equivalent with the common resistor model of the GMR phenomenon.\cite{0022-3727-35-18-201}

Both of the above simple models show that is positive, i.e. the parallel orientation has higher conductance than the antiparallel one. Depending on the model, the relative conductance change ranges between and which indicates that a more complicated model based on the coherent superposition of two scattering regions would also give a result between the above two extreme limits. These considerations show that for typical values of , the relative amplitude of the GMR effect is expected to be significant regardless of the details of the model. Note, however, that this is only valid if the spin information is fully preserved in the spacer layer. As the separation of the magnetic layers becomes larger than the spin diffusion length the GMR effect exponentially decays.\cite{PhysRevB.48.7099,0953-8984-19-18-183201}

The magnetic layers of a spin valve are decoupled by paramagnetic spacer, and this allows switching between parallel and antiparallel alignments. As the relative alignment depends on the external magnetic field, the GMR effect can be used for magnetic sensing. For this purpose the orientation of one layer is pinned by growing it on top of an antiferromagnet, while the unpinned free layer can rotate even under the influence of a weak magnetic field. Spin valves are extensively applied as the read head of hard disks, which utilizes the fast and reliable reading of the magnetic information by an electric signal.

The spin valve structure can also be used to store magnetic information. This type of non-volatile memory consists of a large number of spin valves, each of them being addressed separately in a crossbar wire architecture. The orientation of the free layer defines bit ``0 and bit ``1, which can be changed by the stray field of the nearby crossing wires. The information written in this way is red out by the GMR effect. However, the areal density of this type of magnetoresistive random access memories (MRAM) is limited by the length scale of the slowly decreasing stray fields.

In the most advanced novel MRAMs no external field (and extra wiring) is required to write information in a spin valve memory element. In these devices the orientation of the free layer is manipulated by high density spin polarized currents, while the magnetic information is obtained by low current GMR measurements. The writing is based on the spin-flip electron scattering processes occurring in the free layer, which exert a torque on the magnetization. Even though such spin-flips are rare events (the spin diffusion length is much larger than the characteristic size of the nanodomain), at current densities of about \(10^9 -10^{10}\, \textrm{A/cm}^2\), the induced torque becomes large enough to reverse the magnetization. The details of the spin transfer torque phenomenon are reviewed in Ref.~\cite{Ralph20081190}. Here we just point out the importance of the strongly non-equilibrium state of this nanoscale device: while the above current densities would lead to melting in any macroscopic metal, in this device the length scales which determine its transparency (i.e. its resistance) are well below the inelastic mean free path, and as a consequence the Joule heat is produced outside the device, in a much larger volume. In spite of the huge current densities, the nanoscale electronics defines appropriate signal levels for practical applications (below \(100\,\mu\)A, and around \(1\,\)V). Finally it is to be noted that the spin transfer torque magnetoresistive random access memory (STT-MRAM) is one of the most promising candidate for future spintronic applications.

\section{Conclusions}

Nanoscale phenomena of spin related transport were discussed both theoretically and experimentally. Based on the spin dependent band structure of a magnetic metal, we discussed the propagation of electrons in the ballistic and diffusive limits, and by applying the Landauer formalism, we supplied a \emph{nanoscopic} background for the conventional expression of the current spin polarization. As the most direct experimental method for spin polarization measurements, the Andreev reflection spectroscopy was introduced, and experimental results on Fe and Co were shown. The analysis demonstrated the reliability of measurements carried out in the ballistic limit. The method was also extended for the determination of the spin diffusion length, one of the most important parameters of metals in spintronic applications. The operation of spin valves was described in terms of the Landauer formalism and the magnitude of the GMR effect was determined in the coherent ballistic and the incoherent diffusive limits. Finally a short overview on spin valve applications was given.